LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) (Sedan) >> (55 Hood, Lids) >> Hood >> Impact Guard, Removing And Installing

Impact Guard, Removing And Installing

NOTE:

The impact guard is also equipped with double-sided adhesive tape.

Fig 1: Identifying Impact Guard (Equipped With Double-Sided Adhesive Tape)
GWWA55-10306Courtesy of AUDI OF AMERICA, LLC
  1. Door
  2. Impact Guard
    • To remove, remove the clip from the hood and then remove the impact guard.
  3. Clip
scientia non olet · About LEMON Manuals