Overview - Automatic Head Lamp Range Control

Fig 1: Automatic Headlamp Vertical Aim Control Overview

Courtesy of AUDI OF AMERICA, LLC

1. Right Headlamp Beam Adjustment Motor -V49-
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING .
2. Control Module
   • Vehicles without cornering lamps: Headlamp Range Control Module -J431-
   • Vehicles with cornering lamps: Cornering Lamp and Headlamp Range Control Module -J745-
   • Removing and installing. Refer to HEADLAMP RANGE CONTROL MODULE, REMOVING AND INSTALLING .
   • Integrated in the Vehicle Electrical System Control Module -J519- depending on the version from MY 2013.
3. Connector
4. Left Rear Level Control System Sensor -G76-
   • Component location: on the left rear control arm
   • Removing and installing. Refer to LEFT/RIGHT REAR LEVEL CONTROL SYSTEM SENSOR -G76- / -G77-, REMOVING AND INSTALLING .
5. Left Front Level Control System Sensor -G78-
   • Component location: on the left front control arm
   • Installed depending on the date of manufacture.
   • Removing and installing. Refer to LEFT/RIGHT FRONT LEVEL CONTROL SYSTEM SENSOR -G78- / -G289-, REMOVING AND INSTALLING .
6. Left Headlamp Beam Adjustment Motor -V48-
   • Removing and installing. Refer to LEFT/RIGHT HEADLAMP BEAM ADJUSTMENT MOTOR -V48- / -V49-, REMOVING AND INSTALLING .