Overview - Sill Panel Strip, Front Sill Panel Strip
NOTE:
The overview is based on the driver side. The passenger side is similar and the components are installed reversed from left to right.
- Clip
- Quantity: 4
- Insert in the trim panel
- Replace if damaged or deformed
- Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
- A-Pillar Gap Cover
- Removing and installing. Refer to A-PILLAR GAP COVER, REMOVING AND INSTALLING .
- Operating Lever
- For the cable
- Driver side only
- Removing and installing. Refer to HOOD RELEASE LEVER, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Driver side only
- Front Sill Panel Strip
- Removing and installing. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING, FRONT SILL PANEL .