Overview - Rear Shelf

Fig 1: Rear Shelf Overview

Courtesy of AUDI OF AMERICA, LLC

1. Clip
   • Quantity: 4
   • Insert in the rear shelf
   • Replace if damaged or deformed
   • Remove the clips that are still in the mounting points on the body using the Omega Clip Tool T40280.
2. Rear Shelf

   Vehicles with:

   • without sun shade
   • with sun shade
   • Engaged in the rear window frame
   • Removing and installing. Refer to REAR SHELF, REMOVING AND INSTALLING .
3. Cap
   • Equipment levels
   • Removing and installing. Refer to CAP, REMOVING AND INSTALLING .
4. Bolt
   • 2 Nm
   • Quantity: 4
5. Speaker Trim
   • Equipment levels
   • Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
6. Speaker
   • Equipment levels
   • Removing and installing. Refer to LEFT/RIGHT REAR TREBLE SPEAKER -R14 - / -R16 -, REMOVING AND INSTALLING .
7. Bolt
   • Quantity: 4
   • 2 Nm .

Fig 2: Identifying Rear Shelf Version With Additional Fastener

Courtesy of AUDI OF AMERICA, LLC

-- Versions with additional fasteners: Tighten the bolt -arrow- to 2 Nm.

Fig 3: Identifying Version With Rear Shelf Spacer To Body

Courtesy of AUDI OF AMERICA, LLC

-- Versions with additional fasteners: Tighten the bolt -2- to 2 Nm for the spacer -1-.

• The pin -arrow- must engage the hole on the body.