LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Trim (Sedan) >> 70 Interior Trim >> Passenger Compartment Trim >> A-Pillar Gap Cover, Removing And Installing >> Removing

A-Pillar Gap Cover, Removing And Installing: Removing

Fig 1: Removing A-Pillar Gap Cover
GWWA70-10858Courtesy of AUDI OF AMERICA, LLC

-- Remove the instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .

-- Pull the A-pillar gap cover -1- toward the rear -arrows- and then remove it.