Transfer Case Shaft Seals Overview

Fig 1: Identifying Transfer Case Shaft Seals Overview

Courtesy of AUDI OF AMERICA, LLC

O-ring
- Replace
- Diameter 28 mm
- Color: green
Locking Ring
- Replace
- Diameter 28 mm
- Color: silver
Dust Cap
- Replace
- Removing and Installing. Refer to REAR OUTPUT FLANGE AND DRIVESHAFT SEAL, TRANSFER CASE INSTALLING, REMOVING AND INSTALLING .
Shaft Seal
- Removing and Installing. Refer to REAR OUTPUT FLANGE AND DRIVESHAFT SEAL, TRANSFER CASE INSTALLING, REMOVING AND INSTALLING .
Transfer Case
- Removing and Installing. Refer to TRANSFER CASE, REMOVING AND INSTALLING .
- Replace shaft seals. Refer to TRANSFER CASE SHAFT SEALS .
Ventilation Cap
Shaft Seal
- Removing and Installing. Refer to INPUT SHAFT SEAL, REMOVING AND INSTALLING .
Locking Ring
Flange Shaft
- For the front Driveshaft.
- Removing and Installing. Refer to FRONT FLANGE SHAFT AND DRIVESHAFT SEAL, TRANSFER CASE INSTALLED, REMOVING AND INSTALLING .
Dust Cap
- Replace
Shaft Seal
- Removing and Installing. Refer to FRONT FLANGE SHAFT AND DRIVESHAFT SEAL, TRANSFER CASE INSTALLED, REMOVING AND INSTALLING .