LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Transmission >> Transfer Case >> Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP >> 39 Final Drive, Differential >> Rear Final Drive Axle Oil Level, Checking

Rear Final Drive Axle Oil Level, Checking

Special tools and workshop equipment required 

NOTE:

General Repair Instructions. Refer to GENERAL REPAIR INFORMATION .

When checking oil level, vehicle must be on a level surface.

Procedure

Fig 1: Identifying Sealing Plug For Gear Oil Inspection
GWWN39-1181Courtesy of AUDI OF AMERICA, LLC

-- Position the Used Oil Collection and Extraction Unit VAG 1782 under the rear final drive.

-- Remove the transmission fluid filler plug -arrow- with a hex socket wrench.

-- Fill the gear oil if necessary. .

-- Install the plug -arrow- with a new gasket.

Component Nm
Oil filler plug to final drive 35
  • Install the transmission fluid filler plug with Locking FluidAMV 185 101 A1