LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP >> 39 Final Drive, Differential >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

Component Bolt Size Nm
Drive Axle center bearing   20
Rear subframe, nut 1   90 + 90°
Transmission fluid filler plug to the rear final drive   35
Tunnel Brace   60
  • 1 Replace


Component Bolt Size Nm
Front final drive
Front subframe, nut/bolts 1   90 + 90°
Lock plate 1   30 + 90°
Transmission fluid filler plug to the front final drive   35
  • 1 Replace
scientia non olet · About LEMON Manuals