Special Tools

Special tools and workshop equipment required 

• Engine Support Bridge10-222A
• Engine Support - Bracket w/Spindle and Hook10-222A/10
• Engine Support Bridge - Engine Support 1910-222A/19
• Engine Support Bridge - Sub-frame Adapter10-222A/22
• Hose Clamps - Up To 25mm3094
• Engine/Gearbox JackVAG 1383A

Special tools and workshop equipment required 

• Engine Support Bridge10-222A
• Engine Support Bridge - Sub-frame Adapter10-222A/22
• Lifting Tackle3033
• Hose Clamps - Up To 25mm3094
• Engine/Gearbox JackVAG 1383A
• Engine Bung SetVAS 6122

Special tools and workshop equipment required 

• Press Piece - Multiple UseVW 412
• Press Piece - Bushing - 50mm DiameterVW 432
• Support ChannelsVW 457
• Seal Installer - Flywheel Oil Seal Kit - Seal Installer2003/3
• Subframe Bushing Tool Kit3301

Special tools and workshop equipment required 

• Locking Pin Driver30-505
• Bearing Installer - Needle Bearing30-506B
• -1- - Puller - Kukko Internal - 36-46mm21/6
• -4- - Puller - Kukko Counterstay22/2

Special tools and workshop equipment required 

• Engine Support - Basic SetT40091
  Fig 5: Engine Support Basic Set T40091

  Courtesy of AUDI OF AMERICA, LLC
• Engine Support - Supplement KitT40093A
  Fig 6: Engine Support Supplement Set T40093

  Courtesy of AUDI OF AMERICA, LLC
• Used Oil Collection and Extraction Unit VAG 1782
  Fig 7: Engine and Transmission Holder VAS 6095

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer SetVW 771
  Fig 8: Adapter VW 771/40 From Slide Hammer-Complete Set VW 771

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10256 for rear final drive 0BN
  Fig 9: Identifying Thrust Plate T10256

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft Oil Seal RHT10181 Rear Final Drive 0BN
  Fig 10: Identifying Thrust Plate T10181

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft RHT10433 Rear Final Drive 0BP
  Fig 11: Identifying Thrust Piece T10433

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft LHT10434 for rear final drive 0BP
  Fig 12: Identifying Thrust Piece T10434

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10260
  Fig 13: Identifying Thrust Plate T10260

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10259 for 0C1 front final drive
  Fig 14: Identifying Thrust Plate T10259

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Front Final Drive FlangeT10436 for 0BM final drive
  Fig 15: Identifying Thrust Piece T10436

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Shaft SealT10432 with T10432/1 for Rear Final Drive 0BN
  Fig 16: Identifying Assembly Tool T10432

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Shaft SealT10431 with T10431/1 for Rear Final Drive 0BP
  Fig 17: Identifying Assembly Tool T10431

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Unit InjectorT10055
  Fig 18: Identifying Puller T10055

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Front Final Drive Input ShaftT10430 with T10430/1
  Fig 19: Identifying Assembly Tool T10430

  Courtesy of AUDI OF AMERICA, LLC
• Subframe Bushing Tool Kit3301
  Fig 20: Assembly Tool 3301

  Courtesy of AUDI OF AMERICA, LLC
• Thrust Piece3456
  Fig 21: Identifying Press Piece 3456

  Courtesy of AUDI OF AMERICA, LLC
• Engine/Gearbox Jack - Gearbox SupportT10337
  Fig 22: Engine/Gearbox Jack - Gearbox Support T10337

  Courtesy of AUDI OF AMERICA, LLC
• Transmission SupportVW 785/1B
  Fig 23: Identifying Transmission Support VW 785/1B

  Courtesy of AUDI OF AMERICA, LLC
• -3- - Separating ToolKukko 17-2
  Fig 24: Identifying Kukko Puller

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer Set - HookVW 771/37
• Pneumatic/Hydraulic Foot PumpVAS 6179

Special tools and workshop equipment required 

• Engine Support Bridge10-222A
• Engine Support - Bracket w/Spindle and Hook10-222A/10
• Engine Support Bridge - Engine Support 1910-222A/19
• Engine Support Bridge - Sub-frame Adapter10-222A/22
• Hose Clamps - Up To 25mm3094
• Engine/Gearbox JackVAG 1383A

Special tools and workshop equipment required 

• Engine Support Bridge10-222A
• Engine Support Bridge - Sub-frame Adapter10-222A/22
• Lifting Tackle3033
• Hose Clamps - Up To 25mm3094
• Engine/Gearbox JackVAG 1383A
• Engine Bung SetVAS 6122

Special tools and workshop equipment required 

• Press Piece - Multiple UseVW 412
• Press Piece - Bushing - 50mm DiameterVW 432
• Support ChannelsVW 457
• Seal Installer - Flywheel Oil Seal Kit - Seal Installer2003/3
• Subframe Bushing Tool Kit3301

Special tools and workshop equipment required 

• Locking Pin Driver30-505
• Bearing Installer - Needle Bearing30-506B
• -1- - Puller - Kukko Internal - 36-46mm21/6
• -4- - Puller - Kukko Counterstay22/2

Special tools and workshop equipment required 

• Engine Support - Basic SetT40091
  Fig 5: Engine Support Basic Set T40091

  Courtesy of AUDI OF AMERICA, LLC
• Engine Support - Supplement KitT40093A
  Fig 6: Engine Support Supplement Set T40093

  Courtesy of AUDI OF AMERICA, LLC
• Used Oil Collection and Extraction Unit VAG 1782
  Fig 7: Engine and Transmission Holder VAS 6095

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer SetVW 771
  Fig 8: Adapter VW 771/40 From Slide Hammer-Complete Set VW 771

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10256 for rear final drive 0BN
  Fig 9: Identifying Thrust Plate T10256

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft Oil Seal RHT10181 Rear Final Drive 0BN
  Fig 10: Identifying Thrust Plate T10181

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft RHT10433 Rear Final Drive 0BP
  Fig 11: Identifying Thrust Piece T10433

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange Shaft LHT10434 for rear final drive 0BP
  Fig 12: Identifying Thrust Piece T10434

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10260
  Fig 13: Identifying Thrust Plate T10260

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Flange ShaftT10259 for 0C1 front final drive
  Fig 14: Identifying Thrust Plate T10259

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Front Final Drive FlangeT10436 for 0BM final drive
  Fig 15: Identifying Thrust Piece T10436

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Shaft SealT10432 with T10432/1 for Rear Final Drive 0BN
  Fig 16: Identifying Assembly Tool T10432

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Shaft SealT10431 with T10431/1 for Rear Final Drive 0BP
  Fig 17: Identifying Assembly Tool T10431

  Courtesy of AUDI OF AMERICA, LLC
• Puller - Unit InjectorT10055
  Fig 18: Identifying Puller T10055

  Courtesy of AUDI OF AMERICA, LLC
• Seal Installer - Front Final Drive Input ShaftT10430 with T10430/1
  Fig 19: Identifying Assembly Tool T10430

  Courtesy of AUDI OF AMERICA, LLC
• Subframe Bushing Tool Kit3301
  Fig 20: Assembly Tool 3301

  Courtesy of AUDI OF AMERICA, LLC
• Thrust Piece3456
  Fig 21: Identifying Press Piece 3456

  Courtesy of AUDI OF AMERICA, LLC
• Engine/Gearbox Jack - Gearbox SupportT10337
  Fig 22: Engine/Gearbox Jack - Gearbox Support T10337

  Courtesy of AUDI OF AMERICA, LLC
• Transmission SupportVW 785/1B
  Fig 23: Identifying Transmission Support VW 785/1B

  Courtesy of AUDI OF AMERICA, LLC
• -3- - Separating ToolKukko 17-2
  Fig 24: Identifying Kukko Puller

  Courtesy of AUDI OF AMERICA, LLC
• Slide Hammer Set - HookVW 771/37
• Pneumatic/Hydraulic Foot PumpVAS 6179