LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP >> 39 Final Drive, Differential >> Shaft Seals, Front Final Drive 0BM And 0C1, Replacing >> Left Flange Shaft Seal, Removing And Installing >> Removing

Left Flange Shaft Seal, Removing And Installing: Removing

Fig 1: Securing Slide Hammer VW 771 To Left Flange Shaft
GWWN39-1183Courtesy of AUDI OF AMERICA, LLC

-- Remove the front final drive. Refer to FRONT FINAL DRIVE, REMOVING AND INSTALLING .

-- Attach the Slide Hammer SetVW 771 to the left flange shaft.

-- Remove the left flange shaft.

-- Remove the flange shaft seal using the Slide Hammer SetVW 771 and the Slide Hammer Set - HookVW 771/37.

Fig 2: Pulling Out Sealing Ring For Flange Shaft Using Slide Hammer-Complete Set VW 771 And Additional Part For VW 771 771/37
GWWN39-1184Courtesy of AUDI OF AMERICA, LLC