LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Final Drive & Differential - Transfer Case 0BU, Front Final Drive 0BM, 0C1, 0BN & Rear Final Drive 0BP >> 39 Final Drive, Differential >> Rear Driveshaft >> General Information

General Information

NOTE:

General Repair Instructions. Refer to GENERAL REPAIR INFORMATION .

Driveshaft CV joints may only be moved without force and only as far as their stops, which is a 10° angle.

Do not kink the rear Drive Axle, only store and move when fully extended and with the bracket for the intermediate bearing facing up.

Repair work must not be performed on the Driveshaft.