High Beam Bulb, Through My 09, Removing And Installing

Removal

Fig 1: Identifying Housing Cover

Courtesy of AUDI OF AMERICA, LLC

-- Turn housing cover -1- counterclockwise in direction of -arrow- and remove from headlamp housing.

-- Remove bulb -2- from spring clips.

-- Disconnect electrical harness connector -1- at bulb.

Fig 2: Disconnecting Electrical Harness Connector -1- At Bulb

Courtesy of AUDI OF AMERICA, LLC

Installation

Install in reverse order of removal. Note the following:

-- Insert bulb in housing, taking care not to touch glass bulb with bare hands.

-- Press bulb in housing over spring clamp resistance.

-- Close housing cover by turning clockwise.