Secondary Air Injection Sensor 1 -G609-, REMOVING AND INSTALLING: Removing

Fig 1: Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear engine cover -2- upward.

-- Remove the vacuum hose -1- from the air guide pipe connection.

Fig 2: Identifying Air Guide Pipe And Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamps -arrows- and remove the air guide pipe.

-- Disconnect the connector -1-.

-- Open the locking mechanisms in direction of -arrows- and remove the Secondary Air Injection Sensor 1 -G609- -item 2-.

Fig 3: Identifying Installed Location: AIR Sensor 1 -G609-

Courtesy of AUDI OF AMERICA, LLC