Right Catalytic Converter, Removing And Installing: Removing

-- Loosen the hose clamps -arrows- and lay the air guide pipe aside with the vacuum hose -1- connected.

Fig 1: Identifying Air Guide Pipe And Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Remove the right front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Remove the connector -1- for the Oxygen Sensor after Three Way Catalytic Converter -G130- from the bracket on the right suspension strut tower, then disconnect it and free up the heated oxygen sensor.

Fig 2: Identifying Electrical Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-, the nuts -arrows- and the catalytic converter.

Fig 3: Identifying Right Catalytic Converter Bolt And Nuts

Courtesy of AUDI OF AMERICA, LLC