Overview - SUBFRAME

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Engine Carrier, Engine Mount And Engine Mount Bracket Overview

Courtesy of AUDI OF AMERICA, LLC

Engine Support
- Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING
Bolt
- 120 Nm +180° turn
- Replace
Right Engine Mount
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING
Bolt
- Tightening specification: 50 Nm
Bolt
- Tightening specification: 40 Nm
Nut
- Tightening specification: 75 Nm
Right Engine Support
- Illustration does not correspond to version in vehicle.
Left Engine Support
Bolt
- Tightening specification: 50 Nm
Nut
- Tightening specification: 75 Nm
Bolt
- Tightening specification: 60 Nm
Left Engine Mount
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING
Bolt
- Tightening specification: 120 Nm + 180° turn
- Replace