Accelerator Pedal Module Overview
WARNING: This page is about a different variant/trim than selected.
- Bolt
- Tightening specification: 10 Nm
- Accelerator Pedal Module
- With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
- Removing and installing, refer to ACCELERATOR PEDAL MODULE WITH THROTTLE POSITION SENSORS
- Perform after the first kick-down adaptation in Guided Functions using a vehicle diagnostic tester.
- Electrical Harness Connector
- Bolt
- Tightening specification: 10 Nm
- Lower Driver's Side Instrument Panel Cover Mount