Fan Shroud, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Cover Over Radiator -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Pull cover over radiator in direction of -arrows-.

WARNING:

Danger of personal injury due to the coolant fan turning on by itself.

-- Remove the bolts -1, 4, 5 and 6- from the fan shroud, if equipped.

-- Disconnect the connectors -2 and 3- and free up the wires.

-- Press locking tabs at left and right on fan shroud in direction of -arrow- and at the same time, lift fan shroud out of engine compartment.

Fig 2: Identifying Screws And Connectors On Fan Mount And Pressing Locking Tabs At Left And Right On Fan Shroud -Arrow-

Courtesy of AUDI OF AMERICA, LLC