Coolant Fan -V7- /Coolant Fan 2 -V177-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Coolant Fan -V7- /Coolant Fan 2 -V177- And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

-- Free up the wires.

-- Remove the bolts -1, 2, 3, 4 and 8- and then remove the Coolant Fan 2 -V177- and Coolant Fan Control Module 2 -J671-.

-- Remove the bolts -5, 6 and 7- and then remove the Coolant Fan -V7- and the Coolant Fan Control Module -J293-.