LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (3.0L - Cooling System - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 19 Cooling System >> Coolant Pump And Thermostat >> Coolant Thermostat, Removing And Installing >> Removing

Coolant Thermostat, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

-- Remove the front coolant pipe. Refer to FRONT COOLANT PIPE, REMOVING AND INSTALLING .

NOTE:

Place a cloth underneath to catch any coolant leaking out.

-- Remove the bolts -arrows-.

-- Remove the coolant thermostat with the connections.

Fig 1: Coolant Thermostat And Bolts
GWWA19-10756Courtesy of AUDI OF AMERICA, LLC