Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Coolant Pump Ribbed Belt Pulley Bolts -Arrows- Removal With 3212 To Counterhold.

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the ribbed belt from the Air Conditioning (A/C) compressor but do not remove it completely. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- for the coolant pump ribbed belt pulley using a Wrench - Pin Type3212 to counterhold.

-- Remove the bolts and remove the ribbed belt pulley.

NOTE:

Use a cloth to catch any leaking coolant.

-- Remove the bolts -arrows- and remove the coolant pump.

Fig 2: Identifying Bolts -Arrows- For Coolant Pump Removal

Courtesy of AUDI OF AMERICA, LLC