Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING: Removing

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation -1-. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Free up the coolant hose -arrow-.

-- Remove the bolt -4- and remove the bracket.

-- Loosen the clamps -2 and 3- and remove the coolant hoses from the Charge Air Cooling Pump -V188- with the Hose Clamps - Up To 25mm3094.

Fig 2: Charge Air Cooling Pump -V188-, Tightening Specifications

Courtesy of AUDI OF AMERICA, LLC