LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Transmission Side >> Drive Plate, Removing And Installing >> Removing

Drive Plate, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Insert the Counterhold - Flywheel 10-201 to loosen the bolts.

Fig 1: Lock Flywheel Using Counter Hold Tool 10-201
GWWA13-0574Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts, drive plate and sensor wheel.