Vibration Damper, Removing And Installing: Removing

Fig 1: Swivel Tensioner Clockwise -Arrow- And Then Lock Tensioner Using T10060 A

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Air Conditioning (A/C) compressor ribbed belt. Refer to SUPERCHARGER RIBBED BELT, REMOVING AND INSTALLING .

-- To release the tension on the ribbed belt, swivel the tensioner clockwise -arrow- and then lock using a Locking Pin T10060A.

-- Counterhold with the Wrench - Pin Type 3036 and remove the bolts -1- vibration damper.

Fig 2: Counterhold Engine Vibration Damper

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts and remove the vibration damper.