Overview - Charge Air Cooler

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Charge Air Cooler Components

Courtesy of AUDI OF AMERICA, LLC

Seal
- Replace
O-Ring
- Replace
- Coat with engine oil when installing the charge air cooler
O-Ring
- Replace
- Coat with engine oil when installing the charge air cooler
Supercharger Housing
Seal
- Replace
Right Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING
Bolt
- Tightening specification: 10 Nm
- Replace
- Self-locking
Seal
- Not available individually
- May not be removed from the charge air cooler
- Coat with engine oil when installing the charge air cooler
Bolt
- Tightening specification: 10 Nm
- Replace
- Self-locking
Left Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING
Seal
- Not available individually
- May not be removed from the charge air cooler
- Coat with engine oil when installing the charge air cooler