Charge Air Cooler, Removing And Installing: Removing

• Supercharger secured on the Engine And Transmission Holder VAS6095 for repair work. Refer to SUPERCHARGER, SECURING TO ENGINE/TRANSMISSION HOLDER .

Left Charge Air Cooler

Fig 1: Identifying Bracket -1- To Vacuum Hose

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the bracket -1- for the vacuum hose.

-- Remove the Charge Air Pressure Sensor 2 -G447-. Refer to Charge Air Pressure Sensor -G31- / Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING .

Right Charge Air Cooler

Fig 2: Locating Throttle Valve Control Module & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Remove the Charge Air Pressure Sensor -G31-. Refer to Charge Air Pressure Sensor -G31- / Charge Air Pressure Sensor 2 -G447-, REMOVING AND INSTALLING .

Continued for Both Sides

Fig 3: Coolant Pipes And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2- and remove the coolant pipes on the supercharger.

-- Remove the bolts on the left -1 and 2- and right -3 and 4- charge air coolers.

Fig 4: Identifying Bolts For Left -1 To 2- And Right -3 To 4- Charge Air Coolers

Courtesy of AUDI OF AMERICA, LLC

-- Attach the Seal Installer - Valve Stem Seal Tool 2036 to the supercharger with 2036/1 as illustrated.

Fig 5: Identifying Attachment Of Adjustable Rod 2036

Courtesy of AUDI OF AMERICA, LLC

-- Mount the Seal Installer - Valve Stem Seal Tool 2036 on the front of the charge air cooler.

-- Slowly remove the charge air cooler with even pressure from the supercharger housing using the Tire Pry Lever VAG1942.