Cover With Oil Separator, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - OIL SEPARATOR, CRANKCASE VENTILATION .

NOTE:

Replace the seal.

-- Install the lower left intake manifold section. Refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Install the upper coolant pipe. Refer to UPPER COOLANT PIPE, REMOVING AND INSTALLING .

-- Install the crankcase ventilation hoses. Refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .