LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (3.0L - Lubrication - Engine Code(S): CJTB, CJTC, CNAA, CJWB, CJWC, CJWE, CTWA, CTWB) >> 17 Lubrication >> Oil Pan Upper And Lower Sections, Oil Pump And Oil Cooler >> Oil Pump, Removing And Installing >> Removing

Oil Pump, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the lower oil pan section. Refer to LOWER OIL PAN SECTION, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the oil pump forward from the input shaft.

Fig 1: Locating Oil Pump Bolts
GWWA17-10057Courtesy of AUDI OF AMERICA, LLC