Oil Pump, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specifications. Refer to OIL PAN UPPER AND LOWER SECTIONS, OIL PUMP AND OIL COOLER OVERVIEW .
NOTE:
Replace the seal and O-ring.
-- Install oil pump onto the driveshaft and fasten.
-- Install lower oil pan section. Refer to LOWER OIL PAN SECTION, REMOVING AND INSTALLING .
-- Fill with engine oil and check the oil level. Refer to Standard Maintenance Service .