Oil Pan Upper And Lower Sections, Oil Pump And Oil Cooler: Notes
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Danger of catalytic converter damage.
- The oil level must not exceed the "MAX" marking.
NOTE:
If large quantities of metal particles or abraded material are detected during engine repairs, it may mean the crankshaft or rod bearings are damaged. To prevent damage, perform the following steps after completing the repair: carefully clean the oil channels and replace the oil spray jets, the oil cooler and the oil filter.
Oil capacities, specifications and viscosity classes. Refer to Standard Maintenance Service .
Oil injector jet for piston cooling. Refer to Fig 1.