Engine Oil Cooler, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
Vehicles without the After-Run Coolant Pump -V51- :
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
Vehicles with the After-Run Coolant Pump -V51- :
-- Remove the after-run coolant pump -V51-. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
All Vehicles:
-- Open the clamp and remove the coolant hose -1- and, if necessary, -2- from the oil cooler.
-- Place the Used Oil Collection and Extraction Unit SMN372500 under the engine.
-- Remove the bolts -arrows- and remove the engine oil cooler.