Accelerator Pedal Module With Throttle Position Sensors, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2011 Audi Q7, and 2010 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnect Throttle Position (TP) Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185- 6-Pin Electrical Harness Connector -3-
-- Remove the driver side lower instrument panel cover, refer to INSTRUMENT PANEL COVERS ON DRIVER SIDE OVERVIEW .
-- Remove the driver side lower instrument panel cover mount -2- -arrow-.
-- Disconnect the connector -3-.
-- Remove screws -1 and 4- and remove accelerator pedal module.