LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (3.0L - Fuel Supply System - Engine Code(S): CATA & CNRB) >> 20 Fuel Supply >> Accelerator Pedal Mechanism >> Accelerator Pedal Module Overview

Accelerator Pedal Module Overview

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2011 Audi Q7, and 2010 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Module Assembly Overview
GWWA20-10224Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 10 Nm
  2. Accelerator Pedal Module
    • With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
    • Removing and installing, refer to ACCELERATOR PEDAL MODULE WITH THROTTLE POSITION SENSORS, REMOVING AND INSTALLING .
    • An adaptation may need to be performed after replacing, depending on the engine/transmission combination.
    • If there is a menu option in "Guided Functions", perform an adaptation, refer to Vehicle Diagnostic Tester
  3. Connector
  4. Bolt
    • 10 Nm
  5. Lower Driver Side Instrument Panel Cover Mount