Seat Occupied Recognition Passenger Airbag Deactivation Seat Belt Latch, Replacing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front seat.

Mechanically adjustable seat. Refer to FRONT DRIVER SEAT OVERVIEW
Memory seat, power seat and Comfort seat. Refer to FRONT DRIVER SEAT OVERVIEW .

-- Disconnect the wiring harness at connector -2- that leads to the wiring harness of the Passenger Occupant Detection System Control Module -J706- and the clip at the seat.

Fig 1: Identifying Belt Buckle, Screw, Connector, And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove screw -4- which secures seat belt latch -1- and remove the seat belt latch.