Rear Belt Height Adjuster (2ND Row), Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the C-pillar trim from the body. Refer to C-PILLAR TRIM OVERVIEW .

-- Lay aside the C-pillar trim with the belt webbing threaded through.

-- Remove the bolt -3-.

Fig 1: Belt Height Adjuster -4-

Courtesy of AUDI OF AMERICA, LLC

-- Remove belt relay -2- with belt webbing -1-.

-- Remove the bolt -5-.

-- Pull seat belt height adjuster -4- up and out of the C-pillar.