Center The Three-Point Seat Belt (2ND Row) Overview
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Blind Rivet
- Quantity: 7
- For securing seat belt cover.
- Drill out to remove.
- Install new pop rivet with Pop Rivet PliersVAG1753A.
- Allocation.
- Seat Belt Cover
- Removing and Installing. Refer to CENTER THREE-POINT SEAT BELT (2ND ROW), REMOVING AND INSTALLING CENTER THREE-POINT SEAT BELT (2ND ROW), REMOVING AND INSTALLING .
- Always replace if removed.
- Nut
- 55 Nm
- Belt Roller
- Engage hooks -arrow C- in backrest cut-out -arrow D-
- Removing and Installing. Refer to CENTER THREE-POINT SEAT BELT (2ND ROW), REMOVING AND INSTALLING .
- Threaded Pins
- Welded with backrest.
- Seat Belt Webbing
- Backrest
- Belt End Fitting
- Anchor depression -arrow A- must face toward seat frame ridge -arrow B-.
- Rubber Disc
- Bolt
- 55 Nm