Center Seat Belt Latch Securing Point (3RD Row), Removing And Installing: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Observe the following when doing so:

-- Engage hook -arrow A- from seat belt latch in cut-out -arrow B- in body.

Fig 1: Screws -1- And The Seat Belt Latch -2-, Locking Washers -3-

Courtesy of AUDI OF AMERICA, LLC