Center Seat Belt Latch Securing Point (2ND Row), Removing And Installing: Removing
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC, ELECTRICAL AND MECHANICAL RESTRAINT SYSTEM COMPONENTS, SAFETY PRECAUTIONS AND TESTING PROCEDURES .
-- Remove 2nd row seating bench (two thirds bench). Refer to BENCH SEAT, REMOVING AND INSTALLING .
-- Remove the cap -1- from the bench seat.
-- Remove the screw -arrow- and remove the seat belt latch -2-.