Belt Latch Anchorage Point, Removing And Installing: Removing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Belt Buckle, Screw, Connector, And Bolts

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC, ELECTRICAL AND MECHANICAL RESTRAINT SYSTEM COMPONENTS, SAFETY PRECAUTIONS AND TESTING PROCEDURES .

-- Remove the front seat.

Mechanically adjustable seat. Refer to FRONT DRIVER SEAT OVERVIEW .
Memory seat, power seat and Comfort seat. Refer to FRONT DRIVER SEAT OVERVIEW .

-- Remove belt buckle -1- screw -4-.

-- Vehicles with seat belt fasten sensor: Press the tabs -2- and disconnect the connector.