LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.6L - Ignition/Glow Plug System - Engine Code: BHK) >> 28 Ignition/Glow Plug System >> Specifications >> Technical Data

Technical Data

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Test data 3.6L / 4V / 206 kW-Motor
Idle speed (not adjustable) 600 to 800/min 1)
Engine speed limitation via fuel injector shut off Approximately 6200 RPM
Ignition timing Not adjustable, regulated by control module
Ignition system Single coil ignition system with 6 ignition coils (output stages integrated) that are connected directly to spark plugs via the ignition cables.
Spark plugs Tightening specifications Additional Maintenance Items
Ignition sequence 1-5-3-6-2-4
  • 1) Depending on Engine Control Module (ECM) requirements.