Special Tools
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Crankshaft Holder 3242
- Torque WrenchV.A.G 1332
- Open Ring Spanner Insert, AF 24 mm V.A.G 1332/9
- AdapterT40058
- Camshaft ClampT40070, quantity: 2
- Locking PinT40071, quantity: 2
Special tools and workshop equipment required
- Torque WrenchV.A.G 1331
- Tool Insert, AF 17 V.A.G 1331/6
- Socket Insert AF14 V.A.G 1331/8
- Polydrive Bit and Drive SocketT10070
Special tools and workshop equipment required
- Multipoint SocketT10035
- Impact PullerT10133/3 from the Tool SetT10133
- SocketT40058
- Locating PinsT40116
Special tools and workshop equipment required
- Valve Seal Removal Tool3364
- Valve Stem Seal Driver3365
- Valve Cotters Asm/Dis-Asm Device VAS 5161
- Engine and Transmission HolderVAS 6095
- Cylinder Head Tension DeviceVAS 6419
Special tools and workshop equipment required
- Spark Plug Removal Tool3122 B
- Compression TesterV.A.G 1763
- Ignition Coil PullerT40039
Special tools and workshop equipment required
- Spark Plug Wrench3122 B
- Valve Seal Removal Tool3364
- Valve Stem Seal Driver3365
- Valve Cotters Asm/Dis-Asm Device VAS 5161
- AdapterT40012
Special tools and workshop equipment required
- Dial Gauge HolderVW 387
- Dial GaugeVAS 6079
- SocketT40058
- KeyT40079
- Thrust PieceT40192
- Thrust PieceT40193
- Seal PullerT40195
- Not illustrated:
- Scissor Lift TableVAS 6131 A