Left Cylinder Head Cover: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to Figure.

Installation is in reverse order of removal, note the following:

NOTE:

Replace cylinder head cover gaskets if damaged.

Replace bolts for cylinder head cover if gasket is damaged.

Secure all hose connections with hose clamps appropriate for the model.

-- Clean the sealing surfaces, they must be free of oil and grease.

-- Tighten cylinder head cover bolts. Refer to Figure.