Removal And Installation: Camshafts: Notes

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Multipoint SocketT10035
Impact PullerT10133/3 from the Tool SetT10133
SocketT40058
Locating PinsT40116
Hand drill with plastic brush attachment
Protective eyewear
Sealant.

NOTE:

Removal and installation at left cylinder head is depicted in the following description.