Timing Mechanism Drive Chain Overview
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Guide Rail
- Bolt
- 17 Nm plus an additional 90° turn
- Replace
- Bolt
- Tightening specifications item -15- CAMSHAFT TIMING CHAIN OVERVIEW
- Thrust Washer for Drive Sprocket
- Drive Sprocket for Left Timing Chain
- Bolt
- 17 Nm plus an additional 90° turn
- Replace
- Power Take-Off Drive Chain
- Mark the running direction with pain before removing.
- Removal and installation, refer to TIMING MECHANISM DRIVE CHAIN
- Guide rail
- Bolt
- 17 Nm plus an additional 90° turn
- Replace
- Bolt
- Tightening specifications item -12- CAMSHAFT TIMING CHAIN OVERVIEW
- Mounting Bracket for Drive Sprocket
- For right camshaft timing chain
- Thrust Washer
- Drive Sprocket for Right Timing Chain
- Pivot Pin for Drive Sprocket
- Asymmetrical version
- Installed location, refer to Figure
- Bolt
- Tightening specifications item -2- CAMSHAFT TIMING CHAIN OVERVIEW
- O-ring
- Replace
- Chain Tensioner
- Bolt
- 5 Nm plus an additional 90° turn
- Replace
- Crankshaft
- Bolt
- 17 Nm plus an additional 90° turn
- Replace