Glow Plugs, Removing And Installing: Installing

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Carefully install the glow plugs by hand or with a hose without bending it.

-- Tighten the glow plugs with Glow Plug Socket3220 or Glow Plug SocketVAS6454 to the tightening specification.

Glow plug tightening specification: 17 Nm

-- Connect the glow plug connector and make sure it is secure.

Further installation is performed in reverse order.

Intake manifold flap motor tightening torque. Refer to OVERVIEW - INTAKE MANIFOLD