LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (4.2L - Crankshaft & Cylinder Block - Engine Code: Bar) >> 13 Crankshaft, Cylinder Block >> Specifications >> Fastener Tightening Specifications >> Vibration Damper Tightening Sequence

Vibration Damper Tightening Sequence

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Mounting Bolts On Vibration Damper
GWWA13-10305Courtesy of AUDI OF AMERICA, LLC

-- Tighten bolts -arrow- in diagonal sequence in 3 stages as follows:

-- Tighten the bolts to 15 Nm.

-- Tighten the bolts to 22 Nm.

-- Tighten the bolts an additional 90°.

scientia non olet · About LEMON Manuals