LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (4.2L - Crankshaft & Cylinder Block - Engine Code: Bar) >> 13 Crankshaft, Cylinder Block >> Specifications >> Fastener Tightening Specifications >> Baffle Plate - Tightening Specifications and Sequence

Baffle Plate - Tightening Specifications and Sequence

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Baffle Plate Bolts Tightening Sequence
GWWA13-10357Courtesy of AUDI OF AMERICA, LLC

-- Then tighten the bolts in the sequence -1 to 16- to 9 Nm.

scientia non olet · About LEMON Manuals