LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (3.0L - Ignition/Glow Plug System - Engine Code: CNRB) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Glow Plugs >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Connect the glow plug connector and make sure it is secure.

Further installation is in the reverse sequence to removal.

scientia non olet · About LEMON Manuals