LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (3.0L - Ignition/Glow Plug System - Engine Code: CNRB) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Camshaft Position Sensor -G40- >> Removing

Camshaft Position Sensor -G40-: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position Sensor -G40- Location
GWWA23-10517Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER .

-- Disconnect the connector -3-.

-- Remove the bolt -1- and remove the Camshaft Position Sensor -G40- -2-.

scientia non olet · About LEMON Manuals