LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (3.0L - Lubrication - Engine Code: CATA) >> 17 Lubrication >> Oil Pump, Oil Pan Lower Part >> Oil Pump, Removing And Installing >> Removal

Oil Pump, Removing And Installing: Removal

WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Baffle And Bolts
GWWA17-10168Courtesy of AUDI OF AMERICA, LLC

-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the oil baffle.

-- Remove the bolts -1- and -2-.

Fig 2: Oil Pump Mounting Bolts -1 & 2-, And Oil Pump Drive Shaft -3-
GWWA17-10174Courtesy of AUDI OF AMERICA, LLC

-- Hold the oil pump drive shaft -3- with Long Nose Locking Pliers VAS6226 and push it against the spring force.

-- Remove the oil pump.

NOTE:

The oil pump drive shaft remains installed.