Oil Level Thermal Sensor -G266-, Removing And Installing: Removal
WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Level Thermal Sensor G266, Removing And Installing
Courtesy of AUDI OF AMERICA, LLC
-- Drain engine oil. Refer to Maintenance Booklet 406.
-- Disconnect the connector -3-.
-- Remove the nuts -1- and the Oil Level Thermal Sensor -G266- -item 4-.